Bus Pirate v3.6a is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols all at voltages from 0-5.5V DC. Working with the Bus Pirate is simple and effective type commands into a terminal on your computer..
SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily convert seria..
The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other support circuitry to get the IC ..
The CP2102 basic board made by rhydoLABZ for the USB to serial conversion. This is a great little tool for embedded systems that require a serial connection to a computer. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the ..
This is the CP21202 Breakout Board. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus via a mini USB connector and will appear as a standard COM port.
Thes CP2102 doesn’t require any external oscillator, it ha..
The microUSB Programming Adapter (uUSB-PA5) is a USB to Serial-TTL UART bridge converter which is simple, cost effective, very small and easy to use.It uses a mini-B type USB connector to connect to your PC and is based on the FTDI FT232RQ USB to Serial Bridge IC from FTDI Chip.
It provides t..
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port.
Features:
Simple serial communication.
Operation Level-Digital 5V
Power Supply-External 5V
Router or ADSL firmware upgrade.
GPS serial communicatio..
The 4D Programming Cable is a USB to Serial-TTL UART converter cable. It incorporates the Silabs CP2102 USB to Serial UART bridge IC (as used in the uUSB-MB5 module) which handles all the USB signaling and protocols. The cable provides a fast and simple way to connect all of the 4D devices that requ..
This is a basic breakout board made by rhydoLABZ for the FTDI FT232RL USB to serial IC , based on the well famous FTDI-Basic board from Sparkfun and all credits goes to them. The pinout of this board matches the FTDI cable to work with official Arduino and cloned Arduino boards!!. The boar..
This is a basic breakout board made by rhydoLABZ for the FTDI FT232RL USB to serial IC , based on the well famous FTDI-Basic board from Sparkfun and all credits goes to them.The pinout of this board matches the FTDI cable to work with official Arduino and cloned Arduino boards!!. The board..
This is the newest revision of rhydoLABZ make USB to RS 485 Converter board (INT-1201) .It is very compact and ready to use circuitry which performs the USB (Universal Serial Bus) to two wire RS485 (2 Wire Half Duplex) and vice versa conversion. The board holds an FT232RL USB UART I..
This board converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk to the computer. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Ardui..
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pi..
The Pololu USB-to-serial adapter is a tiny unit that makes it easy to connect a microcontroller project to a PC. You can connect the adapter directly to a microcontroller without an RS-232-to-TTL level converter. It is USB 2.0-compatible and will work with your existing programs that interface with ..